Skip to Content

05 - Configure Customer Parameters

Last modified by Alex Fletcher on 2025-04-14, 10:55

Add default User Group AFNUSER that will be used in the AFN locate process and rules calculation.

Warning

Note: All settings are CASE SENSITIVE

Information

Each time you need to move to a new page/screen, click SAVE in the upper right

  1. Login to Alma IZ
  2. Click the gear in the lower left (configuration)
  3. Click FULFILLMENT
  4. Under GENERAL, click OTHER SETTINGS
  5. For each entry, click the three dots to the right…choose CUSTOMIZE
  6. default_user_group_for_fulfillment_network_locate
    1. Set the value to AFNUSER (case sensitive)
  7. ful_network_default_pickup_inst
    1. Set the value to local (case sensitive)
  8. fulfillment_network_shared_operator_name
    1. Set the value to true (case sensitive)
  9. generate_resource_sharing_temp_barcode
    1. Set the value to false (case sensitive)
  10. network_rota_assignment_rules_precedence
    1. Set the value to false (case sensitive)
  11. network_sending_rules_precedence
    1. Set the value to true (case sensitive)
  12. on_locate
    1. Set the value to ignore (case sensitive)
  13. overdue_at_lost_loan
    1. Set the value to true (case sensitive)
  14. rs_allow_actions_on_scan_in
    1. set the value to true (case sensitive)
  15. rs_default_pickup_location
    1. Ensure the value field is empty
  16. rs_use_new_mashup_form
    1. Set the value to true (case sensitive)
  17. send_courtesy_notices_behavior
    1. CAUTION: Controls the behaviour of the Automatic Renewal job (Notifications - Send Courtesy Notices and Handle Loan Renewals). The Omni policy is to not enable automatic renewals, and this job doesn’t do that (this is set in a TOU). Changing the value updates the value of the Handle loans drop-down list on the Fulfillment Jobs Configuration page and vice versa. IF YOU HAVE your courtesy notices and other overdue and lost loan profiles disabled, you should be careful changing this setting as it may cause existing overdue items to be declared lost.
    2. Set the value to DD_WITHIN_RANGE_ONCE (case sensitive)
  18. should_anonymize_requests_immediately_when_complete
    1. Set the value to true (case sensitive)
  19. uresolver_remote_register
    1. Set the value to None (case sensitive)
  20. Click SAVE in the upper right
  21. Go back and double check that all these settings were saved (we’ve seen instances where some of the settings did not save properly)

(Link to Ex Libris Configure Other Settings Documentation)